Clean Zero

Detailing King ® Clean Zero is a safe and versatile “clean without a trace” pre-treatment product specifically designed for high-end paint surfaces and PPF/color change films. It thoroughly removes contaminants, oxides, grease, as well as old wax, sealants, and coatings from the paint surface, creating a zero-residue clean base. It prepares the paint for correction and maximizes the effectiveness of waxes, ceramic coatings, and sealants !

Features:
【Ultimate Stability】: Validated by centrifuge test at 6000 rpm for 15 min. Permanent suspension system, no separation or clumping, ready to use straight from the bottle. 100x
【Microscope Verified】: Zero residue on paint after rinsing, does not affect adhesion of subsequent products.
【Gentle Formula】: pH≈7, made with 100% biodegradable green natural ingredients. Contains no abrasive particles or strong alkaline components. Cleans without damaging paint or PPF.
【Highly Efficient & Convenient】: No need for repeated wiping. Simply apply and rinse for a deep clean.

【Pre-Treatment Compatibility】:
▮ Sealants (√ )
▮QD treatments (√ )
▮Ceramic sprays (√ )
▮Glaze waxes (√ )
▮Synthetic waxes (√ )
▮ Carnauba waxes (√ )
• Formulation enables extended dwell time, maximizing work ability and rinse window

Applicable Scenarios:
1. Removing industrial fallout and light oxidation from new car paint.
2. Deep cleaning of older vehicles before waxing/coating application (removing stubborn stains like QD, polymer, sealant, old wax residue, grease, tree sap marks).
3. Decontaminating and brightening PPF surfaces.
4. Daily refined cleaning and maintenance of paint surfaces.

Usage Steps:
1. Rinse the vehicle first, keeping the paint surface wet. Ready to use straight from the bottle (no shaking required).
2. Apply an appropriate amount of the cleaning cream to a microfiber decontamination mitt (use of this brand’s dedicated mitt is recommended).
3. Apply evenly to the paint surface (work in sections, each not exceeding 0.5㎡~1㎡).
4. Gently wipe in a circular or cross-hatch pattern for 30 seconds, allowing the cleaning agents to fully break down contaminants.
5. Rinse thoroughly with a pressure washer/shower head (no additional wiping needed), ensuring no residue remains. (The cleaning cream can dwell on the surface for 20-30 minutes and still be rinsed off easily and completely).
6. After drying the paint, you can proceed with subsequent protective treatments like wax or QD, polymer, sealant. (Note: For ceramic coatings, PPF, or vinyl wraps, add a degreasing step before application to improve adhesion)

TIP:
High-end quartz coatings, PPF, and vinyl wraps strictly require IPA-assisted degreasing to prevent residue in hard-to-reach areas.

PREAUTIONS:
• Clean Zero is made to remove coatings, and is not safe on coatings you wish to preserve.
• Keep out of reach of children.